← Indietro
EsameEsame completoTesto e soluzione

01 07 2020

Esame completo di Compressible Fluid Dynamics per il corso di Aerospace Engineering presso Politecnico di Milano. Il documento tratta: Last name: First name: ID: 10191772 Pag. 1/2 Academic year 2019/2020: 1/7/2020 Compressible-Fluid Dynamics Exercise 1 Consider a free jet of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) entering a reservoir with infinite capacity. The following conditions are observed…

Compressible Fluid DynamicsEsame completo

Informazioni sul documento

Cosa trovi in questo materiale

Esame completo di Compressible Fluid Dynamics per il corso di Aerospace Engineering presso Politecnico di Milano. Il documento tratta: Last name: First name: ID: 10191772 Pag. 1/2 Academic year 2019/2020: 1/7/2020 Compressible-Fluid Dynamics Exercise 1 Consider a free jet of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) entering a reservoir with infinite capacity. The following conditions are observed…

Qualità dell’importazione: il testo è stato estratto direttamente dal documento originale.

Contenuti estratti dal documento

Passaggi rappresentativi riconosciuti nelle diverse parti del materiale. Il testo completo resta presente nella pagina per la ricerca, mentre l’anteprima compatta rende più semplice la lettura.

Pagina 1

Last name: First name: ID: 10191772 Pag. 1/2 Academic year 2019/2020: 1/7/2020 Compressible-Fluid Dynamics Exercise 1 Consider a free jet of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) entering a reservoir with infinite capacity. The following conditions are observed in the jet at the inlet: r1 = 1.2 kg/m3, u1 = 140 m/s, Et1 = 390600 J/m3 where r is the density, u is the velocity and Et is the total energy per unit volume. The reference value of the internal energy e(T) is e(0 K) = 0 J/kg. A steady condition is established whereby the fluid exits the reservoir at a velocity u2 of 240 m/s. Assuming that the reservoir walls are adiabatic and no work occurs in the process, compute the Mach number M1 at the inlet and the temperature T2 at the outlet. Answer: M1 = 0.33296 T2 = 147.935 °C Exercise 2 In a one-dimensional compressible flow of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) under the acoustic approximation, the pressure reads: P(x,t) = 103000 + 144.2 sin (2p (x + 409.82 t)) Pa Compute the value of the velocity u and the perturbation density r -r0 at x = 8 s and t = 8 m, where r0 is the unperturbed value of the density. Answer: u(8, 8) = 1.50107E-01 m/s r(8, 8) - r0 = -3.1448E-04 kg/m3 Exercise 3 Consider the following inviscid Burgers equation 𝜕𝑢 1 𝜕𝑢! + =0 𝜕𝑡 2 𝜕𝑥 for the scalar unknown u, where x is the spatial coordinate and t is the time. The initial data is u(x,0) = 3.3 for x ≤0 u(x,0) = 3.3 - 1.5x for 0 < x < 1 u(x,0) = 1.8 for x≥1 compute the value of the solution u at x = 1.3300 and t = 0.2667, at x = 3.0800 and t = 1.0980 and at x = 3.5200 and t = 1.0980. Answer: u(1.3300, 0.2667) = 2.18 u(3.0800, 1.0980) = 3.30 u(3.5200, 1.0980) = 1.80 Exercise 4 Consider a tube filled with still air (polytropic gas with g = 1.4 and R = 287…

Pagina 63

Last name: First name: ID: 10532551 Pag. 1/2 Academic year 2019/2020: 1/7/2020 Compressible-Fluid Dynamics Exercise 1 Consider a free jet of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) entering a reservoir with infinite capacity. The following conditions are observed in the jet at the inlet: r1 = 1.2 kg/m3, u1 = 130 m/s, Et1 = 406200 J/m3 where r is the density, u is the velocity and Et is the total energy per unit volume. The reference value of the internal energy e(T) is e(0 K) = 0 J/kg. A steady condition is established whereby the fluid exits the reservoir at a velocity u2 of 230 m/s. Assuming that the reservoir walls are adiabatic and no work occurs in the process, compute the Mach number M1 at the inlet and the temperature T2 at the outlet. Answer: M1 = 0.30238 T2 = 168.931 °C Exercise 2 In a one-dimensional compressible flow of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) under the acoustic approximation, the pressure reads: P(x,t) = 102000 + 142.8 sin (2p (x + 402.40 t)) Pa Compute the value of the velocity u and the perturbation density r -r0 at x = 6 s and t = 6 m, where r0 is the unperturbed value of the density. Answer: u(6, 6) = -2.41980E-01 m/s r(6, 6) - r0 = 5.3032E-04 kg/m3 Exercise 3 Consider the following inviscid Burgers equation 𝜕𝑢 1 𝜕𝑢! + =0 𝜕𝑡 2 𝜕𝑥 for the scalar unknown u, where x is the spatial coordinate and t is the time. The initial data is u(x,0) = 3.2 for x ≤0 u(x,0) = 3.2 - 1.6x for 0 < x < 1 u(x,0) = 1.6 for x≥1 compute the value of the solution u at x = 1.2500 and t = 0.2500, at x = 2.8000 and t = 1.0417 and at x = 3.2000 and t = 1.0417. Answer: u(1.2500, 0.2500) = 2.00 u(2.8000, 1.0417) = 3.20 u(3.2000, 1.0417) = 1.60 Exercise 4 Consider a tube filled with still air (polytropic gas with g = 1.4 and R = 287…

Pagina 126

Last name: First name: ID: 10586326 Pag. 1/2 Exercise 5 A reservoir with infinite capacity is filled with carbon dioxide at uniform temperature T0 = 23.5 °C and pressure P0 = 2 atm. Carbon dioxide can be assumed to be an ideal polytropic gas with molecular weight µ = 44.01 g/mol and specific-heat ratio g = 1.297. The fluid discharges isentropically through an orifice with a diameter of 1 mm into an ambient at uniform pressure Pa. At the exit section, compute: a) the mass flux m, the exit pressure Pe and the exit velocity ue if the ambient pressure is Pa = 1.2287 atm. b) the mass flux m, the exit pressure Pe and the exit velocity ue if the ambient pressure is Pa = 0.5463 atm. Answer: a) m = 4.4342E-04 kg/s Pe = 124.49 kPa ue = 227.32 m/s b) m = 4.4826E-04 kg/s Pe = 110.70 kPa ue = 251.57 m/s Exercise 6 Consider a symmetric airfoil, in which the upper and lower surfaces are described by the equations Y+(x) = 0.34 x (1-x) and Y-(x) = - 0.34 x (1-x), respectively, with 0 ≤ x ≤ 1. The airfoil is at zero angle of attack in a uniform flow of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) with free-stream Mach number M∞= 1.65 and free-stream pressure P∞ = 0.5 kPa and temperature T∞ = 250 K. Using the linearized theory, compute the drag coefficient CD of the airfoil and the flow velocity u in the x direction and the pressure P at points x = 0.7, y = 0.17 and x = 0.6, y = -0.17. Answer: CD = 1.1744E-01 u(0.7, 0.17) = 546.03 m/s P(0.7, 0.17) = 4.1587E-01 kPa u(0.6, -0.17) = 519.80 m/s P(0.6, -0.17) = 5.1147E-01 kPa Exercise 7 The obstacle in the figure is placed in a uniform flow with M∞ P∞ free-stream Mach number M∞= 1.5 and free-stream 2 pressure P∞ = 60 kPa. The angle between the ramp and the 1 free-stream velocity is q = 6.5°. Compute the Mach number M and the…

Pagina 189

Last name: First name: ID: Pag. 1/2 Academic year 2019/2020: 1/7/2020 Compressible-Fluid Dynamics Exercise 1 Consider a free jet of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) entering a reservoir with infinite capacity. The following conditions are observed in the jet at the inlet: r1 = 1.1 kg/m3, u1 = 100 m/s, Et1 = 321200 J/m3 where r is the density, u is the velocity and Et is the total energy per unit volume. The reference value of the internal energy e(T) is e(0 K) = 0 J/kg. A steady condition is established whereby the fluid exits the reservoir at a velocity u2 of 200 m/s. Assuming that the reservoir walls are adiabatic and no work occurs in the process, compute the Mach number M1 at the inlet and the temperature T2 at the outlet. Answer: M1 = 0.24944 T2 = 111.917 °C Exercise 2 In a one-dimensional compressible flow of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) under the acoustic approximation, the pressure reads: P(x,t) = 100000 + 140 sin (2p (x + 387.13 t)) Pa Compute the value of the velocity u and the perturbation density r -r0 at x = 0 s and t = 0 m, where r0 is the unperturbed value of the density. Answer: u(0, 0) = 0.00000E+01 m/s r(0, 0) - r0 = 0.0000E+01 kg/m3 Exercise 3 Consider the following inviscid Burgers equation 𝜕𝑢 1 𝜕𝑢! + =0 𝜕𝑡 2 𝜕𝑥 for the scalar unknown u, where x is the spatial coordinate and t is the time. The initial data is u(x,0) = 3 for x ≤0 u(x,0) = 3 - 2x for 0 < x < 1 u(x,0) = 1 for x≥1 compute the value of the solution u at x = 1.0500 and t = 0.2000, at x = 2.1000 and t = 0.8750 and at x = 2.4000 and t = 0.8750. Answer: u(1.0500, 0.2000) = 1.50 u(2.1000, 0.8750) = 3.00 u(2.4000, 0.8750) = 1.00 Exercise 4 Consider a tube filled with still air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) at uniform…

Pagina 252

Last name: First name: ID: Pag. 1/2 Exercise 5 A reservoir with infinite capacity is filled with carbon dioxide at uniform temperature T0 = °C and pressure P0 = atm. Carbon dioxide can be assumed to be an ideal polytropic gas with molecular weight µ = 44.01 g/mol and specific-heat ratio g = 1.297. The fluid discharges isentropically through an orifice with a diameter of 1 mm into an ambient at uniform pressure Pa. At the exit section, compute: a) the mass flux m, the exit pressure Pe and the exit velocity ue if the ambient pressure is Pa = atm. b) the mass flux m, the exit pressure Pe and the exit velocity ue if the ambient pressure is Pa = atm. Answer: a) m = kg/s Pe = kPa ue = m/s b) m = kg/s Pe = kPa ue = m/s Exercise 6 Consider a symmetric airfoil, in which the upper and lower surfaces are described by the equations Y+(x) = x (1-x) and Y-(x) = - x (1-x), respectively, with 0 ≤ x ≤ 1. The airfoil is at zero angle of attack in a uniform flow of air (polytropic gas with g = 1.4 and R = 287 J/(Kg K)) with free-stream Mach number M∞= and free-stream pressure P∞ = 0.5 kPa and temperature T∞ = 250 K. Using the linearized theory, compute the drag coefficient CD of the airfoil and the flow velocity u in the x direction and the pressure P at points x = , y = and x = , y = . Answer: CD = u(, ) = m/s P(, ) = kPa u(, ) = m/s P(, ) = kPa Exercise 7 The obstacle in the figure is placed in a uniform flow with M∞ P∞ free-stream Mach number M∞= 1.5 and free-stream 2 pressure P∞ = kPa. The angle between the ramp and the 1 free-stream velocity is q = °. Compute the Mach number M and the pressure P at point 1, located along the ramp surface midway between the two corners, and in point 2 q immediately after the second corner. Answer: M1 = P1 = kPa M2 = P2 = kPa

Anteprima

Prima pagina del documento.

Prima pagina: 01 07 2020