← Indietro
EsameAltroTesto d’esame

1642689311 19 01 22 A

Altro di Internal Combustion Engines per il corso di Energy Engineering presso Politecnico di Milano. Materiale proveniente dall’archivio storico Studwiz e classificato per la consultazione online.

Internal Combustion EnginesAltro

Informazioni sul documento

Cosa trovi in questo materiale

Altro di Internal Combustion Engines per il corso di Energy Engineering presso Politecnico di Milano. Materiale proveniente dall’archivio storico Studwiz e classificato per la consultazione online.

Qualità dell’importazione: il testo è stato estratto direttamente dal documento originale.

Contenuti estratti dal documento

Passaggi rappresentativi riconosciuti nelle diverse parti del materiale. Il testo completo resta presente nella pagina per la ricerca, mentre l’anteprima compatta rende più semplice la lettura.

Pagina 1

19/01/22, 15:22 IC Engines - January 19, 2022. Part A (10 points) https://forms.office.com/Pages/ResponsePage.aspx?id=K3EXCvNtXUKAjjCd8ope64cHfHFJHqdBkPyq7vedZGJUODFZNUlBTTgzTkYxUUpGRV… 1/3 IC Engines - January 19, 2022. Part A (10 points) If the intake valve diameter is reduced, we expect that the volumetric efficiency:1. A) will decrease mainly at high speeds B) will decrease mainly at low speeds C) will decrease in a similar way at all engine speeds D) will decrease mainly at low loads. The two-stroke engine is:2. A) always more efficient than the four-stroke engine B) always less efficient than the four-stroke engine C) characterized by higher thermal and mechanical stresses than the four-stroke D) applied only in the case of very small displacement and effective power. Pulse turbocharging:3. A) does not determine fluctuations of the turbine efficiency B) requires a double-entry compressor C) damps the pressure perturbations in a large volume exhaust manifold D) reduces the “turbo-lag” issue. The waste-gate valve in a turbocharged SI engine must be opened:4. A) to allow the operation of high pressure EGR B) at high engine speeds, to control the turbine power C) at low engine speeds, to control the turbine power D) to increase the compressor boost pressure. 19/01/22, 15:22 IC Engines - January 19, 2022. Part A (10 points) https://forms.office.com/Pages/ResponsePage.aspx?id=K3EXCvNtXUKAjjCd8ope64cHfHFJHqdBkPyq7vedZGJUODFZNUlBTTgzTkYxUUpGRV… 2/3 In a spark ignition engine, when the burnt gas has reached 50% of the chamber volume, the burnt mass fraction: 5. A) is equal to 20% B) is equal to 50% C) is equal to 75% D) is equal to 100% Knock is a form of abnormal combustion which, if not controlled, may occur:6. A) during the expansion stroke of the cycle B) mainly in…

Anteprima

Prima pagina del documento.

Prima pagina: 1642689311 19 01 22 A