Back
ExamFull examExam paper only

240205 Practical Sol

Full exam for Power Production from Renewable Energy in the Energy Engineering degree programme at Politecnico di Milano. The document covers: Exercize 1 T_HTF,hot 390 °C T_HTF,cold 290 °C GHI 960 W/m2 DHI 150 W/m2 zenith 25 ° azimuth -15 ° Steam cycle net power 50 MW 0.37 Ambient Temperature 25 °C Solar Multiple 1.8 Piping thermal losses 2 MW 66 W/m2 Optical Efficiency 0.77 h_heat,loss 15.0 W/m2/K CF 70 Average DNI

Power Production from Renewable EnergyFull exam

Document information

What's included in this study material

Full exam for Power Production from Renewable Energy in the Energy Engineering degree programme at Politecnico di Milano. The document covers: Exercize 1 T_HTF,hot 390 °C T_HTF,cold 290 °C GHI 960 W/m2 DHI 150 W/m2 zenith 25 ° azimuth -15 ° Steam cycle net power 50 MW 0.37 Ambient Temperature 25 °C Solar Multiple 1.8 Piping thermal losses 2 MW 66 W/m2 Optical Efficiency 0.77 h_heat,loss 15.0 W/m2/K CF 70 Average DNI

Import quality: text was extracted directly from the original document.

Extracted content from the document

Representative passages recognised in different parts of the material. The full extracted text remains available to search, while this compact preview makes the page easier to read.

Page 1

Exercize 1 T_HTF,hot 390 °C T_HTF,cold 290 °C GHI 960 W/m2 DHI 150 W/m2 zenith 25 ° azimuth -15 ° Steam cycle net power 50 MW 0.37 Ambient Temperature 25 °C Solar Multiple 1.8 Piping thermal losses 2 MW 66 W/m2 Optical Efficiency 0.77 h_heat,loss 15.0 W/m2/K CF 70 Average DNI 755 W/m2 Average incidence angle 35 ° Auxiliaries average consumption 1.8 MW Solar field equivalent hours 2750 h Receiver/piping thermal losses as in the design case cos(zenith) 0.91 DNI 893.74 W/m2 Qin,cycle 135.14 MW QfromSF to cycle 137.14 MW Q from SF 245.24 MW A SF 394169.70 m2 Qloss 26.015 MW eta_therm 0.904 - Area_cylGlass 17690.295 m2 Dtglass,amb 98.04 °C Tglass 123.0 °C cos(inc),annual 0.8192 - IAM(inc) 1 - 618.5 W/m2 159.7 MW Eel 162488.6 MWh First principle efficiency of steam cycle Receiver specific thermal losses as in the design case IAM=IAM(θ) 1 - 5ꞏ10 -4ꞏθ Power Block efficiency Exercize 2 Electric Power 480 kW Electrci efficiency 38.7% Reflui zootecnici Cattle slurry 3500 t Cattle manure 8500 t OFMSW 5500 t Biomass Biogas Production [Nm3 biogas/t t.q.] Cattle slurry 34 Cattle manure 93 OFMSW 155 Biogas from sewage sludge 95 CH4% in biogas 48% [% mol] LHV CH4 50 MJ/kg MM CH4 16.04 kg/kmol MM CO2 44.01 kg/kmol Molar volume (ideal gas) 22.41 l/mol Electric power of the new engine 990 kW Efficiency of the new engine 41% CH4 from cattle slurry 40884 kg/y CH4 from cattle manure 271585 kg/y CH4 from OFMSW 292886 kg/y CH4 TOT 605354 kg/y CH4 Energy 30267716.2 MJ 8407698.9 kWh Electric Energy Produced 3253779.5 kWh Equivalent hours 6778.7 h Electric Energy Produced (NEW ENGINE) 6710920.2 kWh CH4 Energy 16368098 kWh 58925153 MJ CH4 requested 1178503 kg CH4 Deficit 573149 kg Sludge from sewage treatment 17561 t mol CO2 from CH4 73473 kmol mol CO2 from biogas 79595 kmol CO2 from CH4 oxidation…

Preview

First page of the document.

First page: 240205 Practical Sol