Document information
- University
- Politecnico di Milano
- Degree programme
- Aerospace Engineering
- Subject
- AIRPLANE PERFORMANCE AND DYNAMICS
- Material language
- English
- Classification
- Notes · By topic
- Original format
- Text
- Searchable text
Topic-based study materials for AIRPLANE PERFORMANCE AND DYNAMICS in the Aerospace Engineering degree programme at Politecnico di Milano. The document covers: Flight Dynamics Consolidated Lecture Notes Aircraft kinematics, dynamics, aerodynamic modelling, stability and control V b1 b3 Prepared from the eight lecture PDFs supplied with the request English language and the professor’s notation retained 10 November 2026 How these notes
Topic-based study materials for AIRPLANE PERFORMANCE AND DYNAMICS in the Aerospace Engineering degree programme at Politecnico di Milano. The document covers: Flight Dynamics Consolidated Lecture Notes Aircraft kinematics, dynamics, aerodynamic modelling, stability and control V b1 b3 Prepared from the eight lecture PDFs supplied with the request English language and the professor’s notation retained 10 November 2026 How these notes
Import quality: text was extracted directly from the original document.
Representative passages recognised in different parts of the material. The full extracted text remains available to search, while this compact preview makes the page easier to read.
Flight Dynamics Consolidated Lecture Notes Aircraft kinematics, dynamics, aerodynamic modelling, stability and control V b1 b3 Prepared from the eight lecture PDFs supplied with the request English language and the professor’s notation retained 10 November 2026
Aircraft Flight Dynamics Consolidated lecture notes 1.6 Manoeuvre static stability: pull-up For a pull-up manoeuvre, the normal load factor is V2 n=1+ , gR where R is the flight-path radius. At the bottom of the pull-up, the manoeuvre introduces an increment in the required lift coefficient: (n − 1)W ∆C̄L = . qS The trim equations can be re-solved with this increased lift requirement. The resulting change in elevator deflection per change in manoeuvre intensity is a measure of manoeuvre stability. A stable aircraft typically requires a progressively larger nose-up control input as the demanded load factor increases. The manoeuvre neutral point differs from the ordinary stick-fixed neutral point because the tail downwash and local flow conditions may vary during the manoeuvre. The notes introduce a relative-density parameter to express the additional tail-flow effects. The key conclusion is that manoeuvre stability depends on the geometry, tail effectiveness and the change in tail dynamic pressure/downwash under load. 1.7 Asymmetric and sideslip reference conditions The later lectures consider steady sideslip and non-symmetric reference flight. A sideslip angle β0 ̸= 0 means that the velocity vector is not aligned with the aircraft plane of symmetry. The reference condition can still be steady, but it is no longer symmetric. For a symmetric, level reference condition, typical assumptions are v0 = 0, p0 = q0 = r0 = 0, ϕ0 = 0, with the thrust line and longitudinal axis aligned under the simplified propulsion assumptions. A non-symmetric steady condition may have v0 ̸= 0 (and hence β0 = ̸ 0), while selected angular rates can remain zero. Important distinction A straight trajectory does not by itself imply symmetric flight. The aircraft may fly straight while its plane of…
Chapter 4 Lateral-directional aerodynamic deriva- tives 4.1 Strip theory: local loads along the wing For rolling and yawing moments, the wing can be divided into spanwise strips. Each strip is treated as a small two-dimensional airfoil operating at its local angle of attack and local velocity. The total force and moment are obtained by integrating the strip contributions along the span. For a strip at spanwise coordinate y, dL = q(y)c(y)Cl (y) dy, dD = q(y)c(y)Cd (y) dy. The local velocity differs from the reference velocity when the aircraft has a roll or yaw rate. For small perturbations, the dominant local changes scale with spanwise or longitudinal distance from the CG. p ∆w ∼ py y ∆w spanwise strips Figure 4.1: Strip-theory idea: roll rate changes the local velocity on opposite wing halves. 4.2 Dihedral effect and sideslip A sideslip angle β changes the local flow direction over the wing. Wing dihedral, sweep and vertical-tail geometry convert this into side force and rolling/yawing moments. For a conventional wing with positive dihedral, the rolling-moment derivative due to sideslip is commonly stabilising under the convention used in the notes: Clβ < 0. This is the dihedral effect. A swept wing also contributes, and the sign and magnitude depend on sweep direction and the geometry. The vertical tail generally provides a strong yawing-moment contribution. 16
Aircraft Flight Dynamics Consolidated lecture notes The sign of the pitch-damping derivative is normally such that the moment opposes the pitch rate. Acceleration derivatives account for finite wake-travel time: the wing responds before the disturbed wake reaches the tail. The notes distinguish the effects on lift/moment from the usually much smaller effect on drag. 26
Scope and source fidelity The derivations and models in this document are based on the uploaded handwritten lecture PDFs. Some long semi-empirical coefficient formulae in the source scans are highly configuration-dependent and/or not fully legible at the available scan resolution. In those cases, the notes retain the model structure, variables, physical interpretation and sign information rather than silently supplying a different formula. Exact numerical coefficient estimation should therefore be performed using the specific model or reference method adopted by the course. 37
First page of the document.