Document information
- University
- Politecnico di Milano
- Degree programme
- Mechanical Engineering
- Subject
- Machine Design 2
- Classification
- Exam · Other
- Content
- Exam paper only
- Original format
- Text
- Searchable text
← Back
ExamOtherExam paper only
Oral
University study material for Machine Design 2 in the Mechanical Engineering degree programme at Politecnico di Milano. The document covers: Master of Science in Mechanical Engineering Politecnico di Milano Advanced Machine Design (Prof. S. Beretta) Oral test – 11.09.2025 • Write on your paper the Name, Surname and University ID number. • Save your pdf according your ID number Exercise 1 (2pts) Kth for a given
Machine Design 2Other
Document information
What's included in this study material
University study material for Machine Design 2 in the Mechanical Engineering degree programme at Politecnico di Milano. The document covers: Master of Science in Mechanical Engineering Politecnico di Milano Advanced Machine Design (Prof. S. Beretta) Oral test – 11.09.2025 • Write on your paper the Name, Surname and University ID number. • Save your pdf according your ID number Exercise 1 (2pts) Kth for a given
Import quality: text was extracted directly from the original document.
Extracted content from the document
Representative passages recognised in different parts of the material. The full extracted text remains available to search, while this compact preview makes the page easier to read.
Page 1
Master of Science in Mechanical Engineering Politecnico di Milano Advanced Machine Design (Prof. S. Beretta) Oral test – 11.09.2025 • Write on your paper the Name, Surname and University ID number. • Save your pdf according your ID number Exercise 1 (2pts) Kth for a given material depends on stress ratio: 1. Explain why 2. What is the typical range for steels and Al alloys when -1<R<0.7 ? Exercise 2 (2pts) Determine the amximum lenght of the piston that would ensure that failure is controlled by plastic colapse SY = 200 MPa UTS = 350 MPa E = 80000 MPa L = 150 mm 30 mm 12 mm P P P Exercise 3 (3pts) 1) According to the provided remote stress, estimate the SIF 2 different crack lengths (a1=0.5 mm, a2=10 mm) and verify if the crack leads to failure KIC = 40 MPa√m Exercise 4 (1pts) Calculate the minimum fracture toughness that ensures a LBB design for the pressure vessel here schematized. Internal pressure p = 20 MPa Diameter Di = 350 mm Wall thickness t = 5 mm
Preview
First page of the document.